Description
Details:
Specifications:
Measure range: 0.00 – 14.00PH
Resolution: 0.01PH
Accuracy: ±0.01 PH (at 25℃)
Power Supply: 2*1.5V (LR44 Included)
Operating Temperature: 0℃ – 80℃ (32℉ – 176℉)
Dimension: 155mm* 31mm * 18mm / 6.10’×1.22’×0.70′
Weight: 50g / 1.76oz
Calibration:
1. Turn on the pH meter.
2. Dissolve each buffer solution in 250 ml of distilled water.
3. Immerse the electrode into the pH 6.86 solution (under the temperature of 25℃).
4. Press the ‘CAL'(calibration) button for 5 seconds and release；
– Display screen will start flashing ‘6.86’；
– Wait for it until the display screen stops flashing；
– Rinse the electrode with distilled water and make it dry with filter paper.
5. Repeat the above steps with 4.01 pH buffer powder and 9.18 pH buffer powder.
Note:
Calibration is required in the following conditions.
– Lengthy periods of inactivity
– Very frequent use
– The testing accuracy requirement is very high
– The ‘cal’ key was pushed and the electrode was exposed to air for an extended period of time
Package Includes:
1×pH Meter
3×pH Buffer Powder
1×User’s Manual
